Postformed Products

We are able to manufacture an extensive range of Postform Products to suit your requirements. Indicated below are some examples of standard postformed profiles offered by CPC.
Worktops (Standard)
Worktops (Built Up Edge)
Worktops (Drop Front)
Worktops (Vanity Unit)
Door Elements
Cubicle Pilasters
Worktops (Standard)
     
Single Postformed Panel Double Postformed Panel    
 
Worktops (Built Up Edge)
       
Built Up Edge Single Postform Built Up Edge Single Bullnose Built Up Edge Double Postform Built Up Edge Double Bullnose
       
Worktops (Drop Front)
       
Downstand Single Round Downstand Double Round Downstand Treble Round  
       
Worktops (Vanity Unit)
       
Upstand Treble Round Vanity Treble Round Vanity 4 Round  
       

Door Elements

  Cubicle Pilasters  
       
Single Postformed Panel Double Postformed Panel Single Postformed Panel Double Postformed Panel
       
Product Specifications    
 

WHAT IS THE STANDARD LENGTH OF A POSTFORM COMPONENT?

The standard length offered by CPC is 3050mm

WHAT IS THE MAXIMUM WIDTH OF WORKTOP AVAILABLE?

The maximum width of a standard worktop, door element or cubicle pilaster is 1220mm.
The width of vanity units and drop front worktops are determined by the size of the dropfront and/or upstand.

WHAT IS THE STANDARD RADIUS ON YOUR POSTFORM PRODUCTS?

The standard radius offered by CPC is 12mm.
are you able to postform along a curve?
No. Postforming on a conventional machine is only possible in a straight line.

I HAVE AN ORDER FOR TABLE TOPS, CAN YOU POSTFORM ALL FOUR SIDES?

No.

WHAT INFORMATION WOULD REQUIRE FROM ME?

Faxed drawing detailing your choice of surface material, coreboard and overall size is all we need for a basic worktop or door element.
For non standard products we would require some additional information. Some examples are given below, but our sales staff would be happy to advise you at the time of order.

  • DH - Drop Front Height (overall)
  • UH - Upstand Height(overall)
  • SW - Strip Width

WHAT IS THE MAXIMUM DEPTH OF DROPFRONT THAT CAN BE POSTFORMED?

The maximum overall depth (from the top of the workpiece to the bottom of the dropfront) is 300mm.

WHAT IS THE STANDARD HEIGHT OF A BACKSPLASH?

The minimum overall height of a backsplash (upstand) is 115mm plus the thickness of the core board
ie: 115mm + 38mm = 143mm.
 

Lead time is subject to the type of worktop/panel chosen and the availability of the laminate requested.

We do however maintain a substantial stock level of the most popular laminates to ensure that lead times are kept to a minimum.

site developed by Advance Systems